TELTONIKA

Mobile

• Mobile module

  4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps

• 3GPP Release

  Release 9

• Status

  IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

• SMS

  SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

• USSD

  Supports sending and reading Unstructured Supplementary Service Data messages

• Block/Allow list

  Operator block/allow list (by country or separate operators)

• Multiple PDN

  Possibility to use different PDNs for multiple network access and services

• Band management

  Band lock, Used band status display

• SIM PIN code management

  SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

• APN

  Auto APN

• Bridge

  Direct connection (bridge) between mobile ISP and device on LAN

• Passthrough

  Router assigns its mobile WAN IP address to another device on LAN

Wireless

• Wireless mode

  802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)

• Wi-Fi security

  WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)

• SSID/ESSID

  SSID stealth mode and access control based on MAC address

• Wi-Fi users

  Up to 50 simultaneous connections

• Wireless Connectivity Features

  Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

• Wireless MAC filter

  Allowlist, blocklist

• Wireless QR code generator

  Once scanned, a user will automatically enter your network without needing to input login information

• TravelMate

  Forward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet

• WAN

  1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

• LAN

  1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

• Routing

  Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

• • Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN

  • VoIP passthrough support

    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

  • Connection monitoring

    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

  • Firewall

    Port forward, traffic rules, custom rules, TTL target customisation

  • Firewall status page

    View all your Firewall statistics, rules, and rule counters

  • Ports management

    View device ports, enable and disable each of them

  • , turn auto-configuration on or off, change their transmission speed, and so on

  •  

• Mobile module

  5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G LTE Cat 20 up to 2.0 Gbps DL/ 200M Mbps UL; 3G up to 42 DL/ 5.76 UL Mbps

• 3GPP Release

  Release 15/16 depending on the hardware version

• SIM switch

  2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

• Status

  IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

• SMS

  SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

• USSD

  Supports sending and reading Unstructured Supplementary Service Data messages

• Block/Allow list

  Operator block/allow list (by country or separate operators)

• Multiple PDN

  Possibility to use different PDNs for multiple network access and services

• Band management

  Band lock, Used band status display

• SIM idle protection service

  Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked

• SIM PIN code management

  SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

• APN

  Auto APN

• Bridge

  Direct connection (bridge) between mobile ISP and device on LAN

• Passthrough

  Router assigns its mobile WAN IP address to another device on LAN

• Framed routing

  Framed routing: support an IP network behind 5G UE

Wireless

• Wireless mode

  802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

• Wi-Fi security

  WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)

• SSID/ESSID

  ESSID stealth mode

• Wi-Fi users

  Up to 150 simultaneous connections

• Wireless Connectivity Features

  Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

• Wireless MAC filter

  Allowlist, blocklist

• Wireless QR code generator

  Once scanned, a user will automatically enter your network without needing to input login information

• TravelMate

  Forward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet

• WAN

  1 x WAN port  10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

• LAN 

  4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

• Routing

  Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Gateways 5G gateway with 4G (CAT20) fallback, SA & NSA, Single SIM, 1 x gigabit ethernet port . Region:     INDIA, ASIA, Europe, the Middle East, Africa, Oceania, Brazil. European power supply unit.

Description. The RUT906 is a compact industrial 4G (LTE) router for industrial IoT applications. It is equipped with 4x Ethernet ports, WiFi, Dual-SIM, GPS, an I/O connector block, RS232/RS485 and RutOS software for advanced networking solutions.The Teltonika RUT906 is a rugged, industrial-grade 4G LTE router designed for IoT and M2M applications. It features dual SIM support, auto-failover, and failsafe mechanisms for reliable connectivity. The RUT906 also offers advanced security features like VPN and firewalls, along with remote management capabilities. It is suitable for a variety of industrial applications, including automation, remote monitoring, and smart system integration. Key Features:

• 4G LTE (Cat 4) Connectivity: Supports 4G LTE (Cat 4) up to 150Mbps, 3G up to 42Mbps, and 2G up to 236.8kbps. 
• Dual SIM with Failover: Ensures continuous internet connectivity by switching between SIM cards. 
• Serial Interfaces: Includes RS232 and RS485 serial interfaces for communication with industrial equipment. 
• GNSS Support: Provides GNSS capabilities for location tracking and time synchronization. 
• Ethernet Ports: Features 4x 10/100 Ethernet ports (1 WAN, 3 LAN). 
• WiFi: Supports 802.11 b/g/n Wi-Fi with Access Point (AP) and Station (STA) modes. 
• Industrial Design: Designed to operate in harsh environments with a wide temperature range and ingress protection rating. 
• RutOS: Runs on RutOS software for advanced networking solutions. 

Applications:

• Industrial IoT:Suitable for applications like industrial automation, remote monitoring, and sensor data collection.
• M2M Communications:Provides reliable and secure communication for machine-to-machine applications.
• Remote Monitoring:Allows for remote access and control of devices and systems.
• Smart City Infrastructure:Can be used in smart city applications for data collection and communication. 

5G router Teltonika RUTM51 

Teltonika RUTM51 is a cost-effective multi-network industrial 5G router that provides connectivity for data-demanding applications in industrial environments. Thanks to the support of five Gigabit Ethernet ports and dual-band Wi-Fi 5, it enables fast data transfer between devices, making it ideal for applications requiring stable transmission of large data volumes. The DUAL-SIM feature with automatic failover support ensures uninterrupted operation even in the event of a network outage.

The 5G router Teltonika RUTM51 features fallback to 4G Cat 12 networks, allowing seamless operation in areas where 5G is unavailable. It is equipped with multiple interfaces, digital inputs/outputs, and VPN functionality, making it suitable for a wide range of applications, including remote monitoring, control, and automation. Moreover, its robust construction guarantees reliable operation even in demanding industrial conditions. The 5G router RUTM51 is thus an ideal choice for applications requiring stable and high-speed connectivity.

It supports SA and NSA architectures for the use of 5G infrastructure. The main difference between NSA (Non-Standalone Architecture) and SA (Standalone Architecture) is that NSA anchors the control signalling of 5G radio networks to the 4G core, while the SA scheme connects' >' > 5G networks directly to the 5G core network, the control signalling does not depend on 4G at all sewing.

Data security is ensured by a wide range of software functions, such as control of SMS messages, firewall, OpenVPN, IPSec, RMS. Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL).

The industrial router Teltonika RUTM51 is equipped with the RutOS system. It is an operating system based on OpenWRT Linux, which is a big plus for choosing Teltonika routers. This system offers advanced security features and compatibility with the RMS remote message system.

Key features of the RUTM51:

• Ethernet interface: - 1 x WAN port 10/100/1000 Mbps, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
                                     - 4 x LAN port 10/100/1000 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
• Dual-band WiFi
• Mobile technology: 5G, 4G (LTE Cat 12), 3G
• Wide range of supply voltages: 9-50 V
• RutOS – an easy-to-use, secure and feature-rich operating system
• Teltonika Remote Management System
• Support for SA (Standalone Architecture) and NSA (Non-Standalone Architecture)
• Mounting on a DIN rail
• Degree of protection: IP30
• Dimensions: 132 x 44.2 x 95.0 mm
• Weight: 525 g

Standard package contains:

• Teltonika RUTM51 Router
• 18 W PSU
• 4 x Mobile antennas (swivel, SMA male)
• 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
• Ethernet cable (1.5 m)
• SIM Adapter kit
• QSG (Quick Start Guide) 

Try RMS for free by clicking on this link to register your free 30-day demo account!
LINK: https://rms.teltonika.lt/

We recommend using the complete user manual and documents for configuration, official materials can be found here.

More information can be found in the attached datasheet.